Gryphon Tiny Booster Smast Golw Plug Ignition

Artikelnummer: GAB-3300

Gryphon Tiny Booster Smast Golw Plug Ignition

Dieser Artikel ist nicht auf Lager und muss erst nachbestellt werden.

The Tiny Booster GAB-3300 is a light and compact size glow plug ignitor for Nitro Engines, equipped with a built-in push button and timer function for stand alone usage.

It is also able to operate automatically with the use of a "trigger" optional cable linked to a Hall sensor and also with a Y cable linked to the Hall Sensor plug of standard Nitro Engines Governors / FBL built in Governors.

 

■ TECHNICAL SPECIFICATIONS

 

Input voltage  : 3.2V~16V(1~3 LiPo Cells)

Timer : 12sec Current draw : 0.75A @ 7.4V                      

                                                  0.95A @ 6.0V                     

                                                  1.30A @ 5.2V

Size : 8mm(H) x 17mm(W) x 27mm(L)

Weight : 4g (Main unit)            

               15g (Cable included)

 

■ OPERATION INSTRUCTIONS

 

- You can feed power to the Tiny Booster with an external battery ( Lipo  2S 450mAh for example )   to avoid using a receiver channel port, or feed  it with an available receiver channel port  

 (Do not use the signal wire in that case).

 

- An automatic fuse circuit will prevent circuit loss and protection of the   receiver battery / power supply in case the glow plug would be defective  or in case of short circuit on the glow plug wire or terminals.

 

- An overheating protection circuit will shut down the Tiny Booster in case  the circuit temperature gets too high (for example with too many repeated  attemps to start a faulty engine / wrong fuel line).

Once the unit has cooled  down, normal operation can be processed.

 

- The 3 different colors leds will indicate the state of the Tiny Booster.   

 

RED LED : Glow Plug Ignition 

YELLOW LED : Timer (12sec) 

BLUE LED : Power on

 

■ Smart Cable Operation (Sold Separatly)

 

When using the genuine " Smart Cable" from Gryphon, simply plug it to the Hall Sensor of your nitro engine, or to the hall sensor plugof your Nitro Governor / FBL Governor if it has built in governor with a Y cable.

The "Smart Cable" will pick up the Hall Sensor signal and will activate the ignition at a pre determinated rotation speed / starter speed and allow the engine to start. The built in timer will prevent continous ignition of the glow plug after the enging is effectively started.

Es liegen keine Bewertungen zu diesem Artikel vor.

Artikelnummer: H0514-S
Sofort lieferbar
Artikelnummer: 317-601
Sofort lieferbar
Artikelnummer: 320-502
Nicht lagernd
Artikelnummer: 305-121
Sofort lieferbar
Artikelnummer: 305-618
Nicht lagernd